Opis artikla
Version:
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR
Temperature range:
maks. +110 °C (depending on operating pressure)
Operating pressure:
-1 do 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)
Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!
Optional:
Bellows from NBR, oil resistant -B
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR
Temperature range:
maks. +110 °C (depending on operating pressure)
Operating pressure:
-1 do 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)
Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!
Optional:
Bellows from NBR, oil resistant -B
Lastnosti
| G1 | R 1-1/2" (AG) |
| G2 | R 1-1/2" (AG) |
| Izvedba meh | EPDM |
| Izvedba | Zunanji navoj |
| DN | 40 |
| Aksialno krčenje | 30 |
| Aksialno raztezanje | 10 |
| Lateralni odmik | 15 |
| Odstopanje kota | 25 |
| L | 239 |
| SW1 | 75 |
| SW2 | 54 |
Dodatne informacije o KOM40AG
| Teža | 2,7 kg / Kos |
| GTIN | 4050571443382 |
| Številka carinskega blaga | 40169991 |
| Skladno z RoHS | Da |
Dokumenti
- Catalogue page Atlas 9 (Page 451) (PDF)
- Dokumentacijo: Elastomer expansion joints (PDF)
- Dokumentacijo: PED statement (PDF)
- 3D CAD file (volume model) (Samo za prijavljene stranke) (STP)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: