Če naročite prek spleta od ponedeljka do četrtka od 16:30 - 21:00 ali v petek od 16:30 - 18:00, pošljemo vaše naročilo po želji še isti dan z GLS (stroški: 5%, min. 10,00 €).
457,02 €
z DDV
Količina Kos
Lastnosti
| Centre of mass distance of payload to Joch plate [mm] | 5 |
| Stroke [mm] | 10 |
| Piston diameter | 4 mm |
| Operating mode actuator unit | Joch |
| Dampening | P: Elastic silencer rings / plates double-sided |
| installation position | arbitrary |
| Guide | sliding guide |
| Construction set up | Guide |
| Position detection | without |
| Operating pressure [bar] | 3.5 to 7 |
| Max. speed [m/s] | 1 |
| Principle of operation | double acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| ambient temperature [°C] | -5 to 60 |
| Impact energy at the end positions [J] | 0,006 |
| Max. torque Mx [Nm] | 0,02 |
| Max. usable load depending on the stroke at a defined distance xs [N] | 1,7 |
| Theoretical force at 6 bar, Return flow [N] | 5,5 |
| Theoretical force at 6 bar, flow [N] | 7,5 |
| Moving mass [g] | 3,2 |
| Moving mass at 0 mm stroke [g] | 3,2 |
| Supplement moved mass per 10 mm stroke [g] | 1,3 |
| Pneumatic connection | PK-2 |
| Cover material | Aluminium wrought alloy |
| Seals material | NBR |
| Housing material | Aluminium wrought alloy |
| Piston rod material | High-alloyed stainless steels |
Dodatne informacije o OT-FESTO004391
| Teža | 32 g / Kos |
| GTIN | 4052568149970 |
| Številka carinskega blaga | 84123100 |
| Proizvajalec | Festo |
Dokumenti
- Group data sheet: DFC (english) (PDF)
- Dokumentacijo (slovene) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: