Če naročite prek spleta od ponedeljka do četrtka od 16:30 - 21:00 ali v petek od 16:30 - 18:00, pošljemo vaše naročilo po želji še isti dan z GLS (stroški: 5%, min. 10,00 €).
Opis artikla
Application:
The electronic flow monitor monitors liquid media continuously. Its application can be seen wherever flows need to be monitored with minimal pressure loss. The single-piece version of the measuring pin reduces the sensitivity to contamination to a considerable extent. The electronic flow monitor works as per the calorimetric principle. The front face of the sensor is heated up to a few degrees over the temperature of the flow media. When the medium flows, the heat generated in the sensor is dissipated, i.e. the sensor is cooled. The cooling process is a perfect measure of the speed of flow.
The sensor signal is compared with the reference data stored in the micro-controller. Differences between the desired and actual values of the speed of flow trigger off an output signal.
Materials:
measuring element: 1.4301, housing: glass fibre reinforced polyamide
Temperature range:
-20 do +60 °C (medium: -20 do +80 °C)
Media:
Water and aqueous media
Protection class:
IP 65
Electrical connection:
M 16x1.5 cable gland
Advantages compared with mechanical flow monitors:
•optimum temperature compensation,
•intelligent switch property,
•measuring range adaptation, no moving parts,
•simplest installation, commissioning and operation,
•low pressure loss
Optional:
Material of measuring element: 1.4404 -4A, Electrical connection through an M 12 plug (A-coded, 4-pole, 24 V DC) -M12
Switching range depending on the tube diameter (for water):
DN 8: 0,12 - 6,0 l/min, DN 10: 0,19 - 9,4 l/min, DN 15: 0,42 - 21,8 l/min; DN 20: 0,75 - 37,7 l/min, DN 25: 1,18 - 59 l/min, DN 30: 1,7 - 84,8 l/min, DN 40: 3 - 150 l/min, DN 50: 4,7 - 235 l/min, DN 60: 6,8 - 340 l/min, DN 80: 12 - 603 l/min, DN 100: 18,8 - 942 l/min, DN 150: 42,4 - 2120 l/min
The electronic flow monitor monitors liquid media continuously. Its application can be seen wherever flows need to be monitored with minimal pressure loss. The single-piece version of the measuring pin reduces the sensitivity to contamination to a considerable extent. The electronic flow monitor works as per the calorimetric principle. The front face of the sensor is heated up to a few degrees over the temperature of the flow media. When the medium flows, the heat generated in the sensor is dissipated, i.e. the sensor is cooled. The cooling process is a perfect measure of the speed of flow.
The sensor signal is compared with the reference data stored in the micro-controller. Differences between the desired and actual values of the speed of flow trigger off an output signal.
Materials:
measuring element: 1.4301, housing: glass fibre reinforced polyamide
Temperature range:
-20 do +60 °C (medium: -20 do +80 °C)
Media:
Water and aqueous media
Protection class:
IP 65
Electrical connection:
M 16x1.5 cable gland
Advantages compared with mechanical flow monitors:
•optimum temperature compensation,
•intelligent switch property,
•measuring range adaptation, no moving parts,
•simplest installation, commissioning and operation,
•low pressure loss
Optional:
Material of measuring element: 1.4404 -4A, Electrical connection through an M 12 plug (A-coded, 4-pole, 24 V DC) -M12
Switching range depending on the tube diameter (for water):
DN 8: 0,12 - 6,0 l/min, DN 10: 0,19 - 9,4 l/min, DN 15: 0,42 - 21,8 l/min; DN 20: 0,75 - 37,7 l/min, DN 25: 1,18 - 59 l/min, DN 30: 1,7 - 84,8 l/min, DN 40: 3 - 150 l/min, DN 50: 4,7 - 235 l/min, DN 60: 6,8 - 340 l/min, DN 80: 12 - 603 l/min, DN 100: 18,8 - 942 l/min, DN 150: 42,4 - 2120 l/min
Lastnosti
| Izvedba | 1.4404 z električnim priključkom z vtičem M 12 (24 V/DC) |
| Navoj | G 1/2" |
| Napetost | 24 V DC |
| Tip kontakta | Izklopni kontakt NPN / PNP preklopljivo maks. 400 mA |
| pribl. preklopno območje (voda) pri nazivni širini 8 mm | 0,12 - 6,0 |
| pribl. preklopno območje (voda) pri nazivni širini 10 mm | 0,19 - 9,4 |
| pribl. preklopno območje (voda) pri nazivni širini 15 mm | 0,42 - 21,8 |
| pribl. preklopno območje (voda) pri nazivni širini 20 mm | 0,75 - 37,7 |
| pribl. preklopno območje (voda) pri nazivni širini 25 mm | 1,18 - 59,0 |
| pribl. preklopno območje (voda) pri nazivni širini 30 mm | 1,7 - 84,8 |
| pribl. preklopno območje (voda) pri nazivni širini 40 mm | 3,0 - 150,0 |
| pribl. preklopno območje (voda) pri nazivni širini 50 mm | 4,7 - 235,0 |
| pribl. preklopno območje (voda) pri nazivni širini 60 mm | 6,8 - 340,0 |
| pribl. preklopno območje (voda) pri nazivni širini 80 mm | 12,0 - 603,0 |
| pribl. preklopno območje (voda) pri nazivni širini 100 mm | 18,8 - 942,0 |
| pribl. preklopno območje (voda) pri nazivni širini 150 mm | 42,4 - 2120,0 |
Dodatne informacije o SWE12/24ES4A-M12
| Teža | 490 g / Kos |
| GTIN | 4050571681517 |
| Številka carinskega blaga | 90261029 |
Dokumenti
- Catalogue page Atlas 9 (Page 694a) (PDF)
- Dokumentacijo (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: