Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
High-performance precision pressure regulator, G 1/4", 0,05 do 8 bar
Št. Izdelka:
FDR 07-8
Opis artikla
Application:
High performance precision pressure regulators are used in order to adjust an extremely accurate pressure - regardless of pre-pressure and flow performance. It is used for example for control and regulation units in process engineering, which has the highest pressure stability requirements. The precision pressure regulator convinces through low own air consumption and large relief system, both of which can be captured and discharged via a G 1/4" bore hole.
Version:
Precision pressure reducer, reversible (with secondary relieving) Collective relieving through G 1/4" borehole)
Materials:
Body: die-cast zinc, diaphragms and seals: NBR
Temperature range:
-10 do +60 °C
Input pressure:
maks. 12 bar
Pressure gauge connection:
G 1/8"
Switch panel thread:
M 12x1 & M 30x1,5
Own air consumption:
< 0,5 l/min (at 8 bar input pressure)
Control accuracy:
± 2.5 mbar
Media:
fine-filtered compressed air (5 µm) & neutral gases, oil-free
Flow:
1250 l/min, secondary vent: 500 l/min
Advantages:
•automatic venting in the event of overpressure on the secondary side up to 500 l/min,
•captured exhaust for relief system and own air consumption,
•high flow at constant pressure,
•most precise pressure regulation regardless of the pre-pressure and flow performance
Warning:
This device is supplied without a pressure gauge. We recommend ordering a suitable pressure gauge separately.
High performance precision pressure regulators are used in order to adjust an extremely accurate pressure - regardless of pre-pressure and flow performance. It is used for example for control and regulation units in process engineering, which has the highest pressure stability requirements. The precision pressure regulator convinces through low own air consumption and large relief system, both of which can be captured and discharged via a G 1/4" bore hole.
Version:
Precision pressure reducer, reversible (with secondary relieving) Collective relieving through G 1/4" borehole)
Materials:
Body: die-cast zinc, diaphragms and seals: NBR
Temperature range:
-10 do +60 °C
Input pressure:
maks. 12 bar
Pressure gauge connection:
G 1/8"
Switch panel thread:
M 12x1 & M 30x1,5
Own air consumption:
< 0,5 l/min (at 8 bar input pressure)
Control accuracy:
± 2.5 mbar
Media:
fine-filtered compressed air (5 µm) & neutral gases, oil-free
Flow:
1250 l/min, secondary vent: 500 l/min
Advantages:
•automatic venting in the event of overpressure on the secondary side up to 500 l/min,
•captured exhaust for relief system and own air consumption,
•high flow at constant pressure,
•most precise pressure regulation regardless of the pre-pressure and flow performance
Warning:
This device is supplied without a pressure gauge. We recommend ordering a suitable pressure gauge separately.
Lastnosti
| Navoj | G 1/4" |
| Območje reguliranja tlaka | 0,05 - 8 |
| Pritrdilni nosilec | MW 1 |
Dodatne informacije o FDR07-8
| Teža | 650 g / Kos |
| GTIN | 4050571852672 |
| Številka carinskega blaga | 84811099 |
| Skladno z RoHS | Da |
YouTube videi:
Dokumenti
- Catalogue page Atlas 9 (Page 613) (PDF)
- Dokumentacijo: Decision aid for selection of air units (PDF)
- 3D CAD file (volume model) (Samo za prijavljene stranke) (STP)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: