Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
2.457,56 €
z DDV
Količina Kos
Lastnosti
| Working stroke [mm] | 9 to 15 |
| size | 10 |
| Max. linear stroke at 90° swivel angle | 90/90 mm |
| Z-stroke [mm] | 80 to 100 |
| Dampening | Silencer above buffer |
| installation position | arbitrary |
| Construction set up |
Drive shaft, Linear guide plus rotating bearing, Force controlled movement cycle |
| Position detection | For proximity switch |
| Repeatability end positions | ±0.02 mm |
| ambient temperature [°C] | 0 to 60 |
| Max. torque Mx [Nm] | 0,6 |
| Max. torque My [Nm] | 0,6 |
| Max. torque Mz [Nm] | 0,6 |
| Maximum usage load [KGM] | 0,5 |
| Max. process force in Y-direction [N] | 30 |
| Fastening type | With Throughway bore and centring sleeve |
| Material information | Copper and PTFE-free |
| Stoppers material | High-alloyed steel |
| Spring pressure piece material | High-alloyed steel |
| Base plate material |
Aluminium wrought alloy, anodized |
| Bracket material |
Aluminium wrought alloy, anodized |
| Cross-guide material | Quenched and tempered steel |
| Swivel lever material |
Case-hardening steel, Burnished |
| Backgrounds material |
Case-hardening steel, hardened |
| Sensor rail material |
Aluminium wrought alloy, anodized |
| Bar material |
Aluminium wrought alloy, anodized |
| Positioning screw material | High-alloyed steel |
| Cover material |
Aluminium wrought alloy, anodized |
| Max. actuator torque on drive shaft [Nm] | 0,85 |
| Max. axial force on the drive shaft [N] | 10 |
| Max. radial force on drive shaft [N] | 30 |
Dodatne informacije o OT-FESTO021422
| Teža | 1,9 kg / Kos |
| GTIN | 4052568178789 |
| Številka carinskega blaga | 84799070 |
| Proizvajalec | Festo |
Dokumenti
- Group data sheet: HSW (english) (PDF)
- Dokumentacijo (slovene) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Ni na zalogi
Možnosti plačila: