MULTIFIX diaphragm drier, G 1/2", Multifix 2

Št. Izdelka:

FMT 12-950

Vsi artikli te skupine

Exemplaire exposé: Séchoir à membrane - Multifix

3.865,67 € z 19 % DDV

Količina

Kos

ponovno na voljo v ⌀ 10 tednih

Opis artikla

Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate

Temperature range:
-10 do +60 °C

Media:
Compressed air, neutral gases

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)

Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.

Note about semi-automatic condensate drain:
As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

Application:
Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Model series 1: Prefilter type F 14 AM + microfilter FX 14 + 2 x coupling kit KP 1
Model series 2: Prefilter type F 12 AM + microfilter FX 12 + 2 x coupling kit KP 2
All diaphragm driers have their own air consumption, which is depending on pressure and size.

Input pressure:
4 do 12 bar

Information:
Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.

Lastnosti

Izvedba	Membranski sušilnik
Serija	Multifix 2
Navoj	G 1/2"
Poraba zraka	120
maks. pretok pri znižanju rosišča tlaka za 13 K*	1100
maks. pretok pri znižanju rosišča tlaka za 20 K*	830
maks. pretok pri znižanju rosišča tlaka za 35 K*	480
maks. pretok pri znižanju rosišča tlaka za 45 K*	380
L	69
Pritrdilni nosilec	W 2
Sklopni paket	KP 2

Dodatne informacije o FMT12-950

Teža	4,8 kg / Kos
GTIN	4050571303389
Tariff No.	84811005
Skladno z RoHS	Da

Dokumenti

Catalogue page Atlas 9 (Page 587) (PDF)
Dokumentacijo (PDF)
Dokumentacijo: Decision aid for selection of air units (PDF)
Podatkovni list (Pogled za tiskanje)
Podatkovni list (angleščina) (Pogled za tiskanje)

*Example: At a compressed air (not dried) inlet temperature of 25°C, the pressure dew point is 25 °C - 20K = 5°C at a flow rate of 44 l/minute with the type FMT 14-50.

Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Naši izdelki in blago so na splošno namenjeni samo za industrijsko in komercialno uporabo.