2. Tlacni regulator – priprava – manometer – termometer – pretok in merjenje stanja polnosti
  3. Naprave za vzdrževanje – Multifix
  4. Membranski sušilnik – Multifix
  5. FMT 14-200

MULTIFIX diaphragm drier, G 1/4", Multifix 1

Št. Izdelka:

FMT 14-200

Vsi artikli te skupine
2.256,81 € z DDV
Kos
Opis artikla
Materials:
 Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate

Temperature range:
 -10 do +60 °C

Media:
 Compressed air, neutral gases

ATEX:
 Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)

Advantages:
 •Easy assembly of individual components using coupling kits within a model series and thread size.

Note about semi-automatic condensate drain:
 As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

Application:
 Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Model series 1: Prefilter type F 14 AM + microfilter FX 14 + 2 x coupling kit KP 1
Model series 2: Prefilter type F 12 AM + microfilter FX 12 + 2 x coupling kit KP 2
All diaphragm driers have their own air consumption, which is depending on pressure and size.

Input pressure:
 4 do 12 bar

Information:
 Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.
Lastnosti
Iz­ved­ba Mem­bran­ski su­šil­nik
Se­ri­ja Mul­ti­fix 1
Navoj G 1/4"
Po­ra­ba zraka 24
maks. pre­tok pri zni­ža­nju ro­si­šča tlaka za 13 K* 246
maks. pre­tok pri zni­ža­nju ro­si­šča tlaka za 20 K* 176
maks. pre­tok pri zni­ža­nju ro­si­šča tlaka za 35 K* 88
maks. pre­tok pri zni­ža­nju ro­si­šča tlaka za 45 K* 67
L 48
Pri­tr­dil­ni no­si­lec W 1
Sklo­pni paket KP 1
Dodatne informacije o FMT14-200
Teža 850 g / Kos
GTIN 4050571303419
Številka carinskega blaga 84213925
Skladno z RoHS Da
Dokumenti
*Example: At a compressed air (not dried) inlet temperature of 25°C, the pressure dew point is 25 °C - 20K = 5°C at a flow rate of 44 l/minute with the type FMT 14-50.

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo

Pribor

Spoj­ni kom­ple­ti – Mul­ti­fix
11 Iz­del­kov
Mon­ta­žni ma­te­ri­al - Mul­ti­fix
14 Iz­del­kov
Možnosti plačila:

Po povzetju

Račun

Odprema ob vikendih

Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).