Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
Opis artikla
Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate
Temperature range:
-10 do +60 °C
Media:
Compressed air, neutral gases
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)
Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.
Note about semi-automatic condensate drain:
As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
Application:
Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Erreichbare Druckluftqualität (ISO 8573-1):
[1:2:2] (mit Aktivkohlefilter: [1:2:1])
Note:
All diaphragm driers have their own air consumption, which is depending on pressure and size.
Input pressure:
4 do 12 bar
Information:
Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate
Temperature range:
-10 do +60 °C
Media:
Compressed air, neutral gases
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)
Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.
Note about semi-automatic condensate drain:
As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
Application:
Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Erreichbare Druckluftqualität (ISO 8573-1):
[1:2:2] (mit Aktivkohlefilter: [1:2:1])
Note:
All diaphragm driers have their own air consumption, which is depending on pressure and size.
Input pressure:
4 do 12 bar
Information:
Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.
Lastnosti
| Izvedba | Membranski sušilnik |
| Serija | Multifix 1 |
| Navoj | G 1/4" |
| Poraba zraka | 6 |
| maks. pretok pri znižanju rosišča tlaka za 13 K* | 61 |
| maks. pretok pri znižanju rosišča tlaka za 20 K* | 44 |
| maks. pretok pri znižanju rosišča tlaka za 35 K* | 21 |
| maks. pretok pri znižanju rosišča tlaka za 45 K* | 15 |
| L | 48 |
| Pritrdilni nosilec | W 1 |
| Sklopni paket | KP 1 |
Dodatne informacije o FMT14-50
| Teža | 550 g / Kos |
| GTIN | 4050571303440 |
| Tariff No. | 84213925 |
| Skladno z RoHS | Da |
Dokumenti
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*Example: At a compressed air (not dried) inlet temperature of 25°C, the pressure dew point is 25 °C - 20K = 5°C at a flow rate of 44 l/minute with the type FMT 14-50.
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Naši izdelki in blago so na splošno namenjeni samo za industrijsko in komercialno uporabo.
Možnosti plačila: