Opis artikla
Version:
Filtering using the centrifugal principal and sintered filter
Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: polycarbonate
Temperature range:
-10 do +60 °C
Pore width in the filter:
5 µm (model series 5: 40 µm)
Condensate draining:
semi-automatic**
Media:
Compressed air, neutral gases
Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.
Input pressure:
1.5 - 16 bar (with metal bowl max. 20 bar*)
Max. condensate amount:
50 cm³
Flow:
5850 l/min
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Optional:
Version with protective cage -S, Version with metal bowl* and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC
Filtering using the centrifugal principal and sintered filter
Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: polycarbonate
Temperature range:
-10 do +60 °C
Pore width in the filter:
5 µm (model series 5: 40 µm)
Condensate draining:
semi-automatic**
Media:
Compressed air, neutral gases
Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.
Input pressure:
1.5 - 16 bar (with metal bowl max. 20 bar*)
Max. condensate amount:
50 cm³
Flow:
5850 l/min
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Optional:
Version with protective cage -S, Version with metal bowl* and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC
Lastnosti
Dodatne informacije o F34
| Teža | 750 g / Kos |
| GTIN | 4050571291952 |
| Tariff No. | 84213925 |
| Skladno z RoHS | Da |
Dokumenti
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*Metal bowl M with automatic discharge AM / AMNC: max. 16 bar, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing on the drain plug tightly.
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Naši izdelki in blago so na splošno namenjeni samo za industrijsko in komercialno uporabo.
Pribor
Možnosti plačila: