1,54 € z DDV
Kos
Opis artikla
Materials:
NBR: (-10°C to +80°C) elastic standard material for neutral media such as air, oil and water. Good resistance to mechanical loads, EPDM: (-20°C to +130°C) elastic, resistance to alkaline solutions and acids of average concentration, water, hot water and steam. Not resistance to oils and greases, FKM: (-20°C to +180°C) elastic, elastomer with high temperature and weather resistance. Suitable for many acids, bases, fuels and oils (also synthetic). Not resistant to hot water and steam, CSM (Hypalon): (-40°C to +140°C) elastic and with good chemical resistance,
PTFE*: (-180°C to +200°C) very stiff and very good chemical resistance (install carefully). Resistant against almost all chemicals, even at high temperatures, NBR / PTFE: (-10°C to +80°C) elastic and with very good chemical resistance, FKM / PTFE: (-20°C to +180°C) elastic and with very good chemical resistance,
Lastnosti
Iz­ved­ba Iz ce­le­ga
Ma­te­ri­al NBR
DN 15 (1/2")
Zu­na­nji pre­mer (pribl.) 26
De­be­li­na 4,0
Tem­pe­ra­tur­no ob­mo­čje od -10 do +80
Dodatne informacije o KLOR12B
Teža 1,6 g / Kos
GTIN 4050571167462
Številka carinskega blaga 40169300
Dokumenti
*Not recommended as very stiff, small nominal widths are difficult to assemble!

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo
Možnosti plačila:

Po povzetju

Račun