Lastnosti
| size | Standard |
| Nominal width [mm] | 8,4 |
| Seal type on stud | gasket |
| installation position | arbitrary |
| Packing size | 1 |
| Construction set up | Push-pull principle |
| Operating pressure complete temperature range [bar] | -0,95 to 16 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Information about operating and control medium | Oiled operation possible |
| Corrosion resistant class KBK | 4 - particularly severe corrosion stress |
| Food compatibility | See expanded material information |
| ambient temperature [°C] | -20 to 150 |
| Nominal tightening torque [Nm] | 9,0 |
| Tolerance to nominal tightening torque | ± 20 % |
| Pneumatic connection 1 | Male thread G1/2 |
| Pneumatic connection 2 | For hose exterior diameter 12 mm |
| Material information | RoHs compliant |
| Housing material | High-alloyed stainless steels |
| Sleeve material | High-alloyed stainless steels |
| O-ring material | FPM |
| Tube seal, hose seal material | FPM |
| Hose clamping segment material | High-alloyed stainless steels |
Dodatne informacije o OT-FESTO082037
| Teža | 45 g / Kos |
| GTIN | 4052568451110 |
| Številka carinskega blaga | 73072910 |
| Proizvajalec | Festo |
Dokumenti
- Group data sheet: NPQR (english) (PDF)
- Dokumentacijo (slovene) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: