Če naročite prek spleta od ponedeljka do četrtka od 16:30 - 21:00 ali v petek od 16:30 - 18:00, pošljemo vaše naročilo po želji še isti dan z GLS (stroški: 5%, min. 10,00 €).
Pressure limiting valve, G 1/2", 0,1 do 3 bar, Standard 3
Št. Izdelka:
DVU 33-3
Opis artikla
Application:
Manually adjustable relief valve to protect pneumatic devices from damage caused by overpressure.
Version:
spring-loaded diaphragm valve with adjustable opening pressure
Materials:
Body: die-cast zinc Z410, diaphragms and seals: NBR
Temperature range:
-10 do +60 °C
Pressure gauge connection:
Mini: G 1/8" Standard G 1/4"
Switch panel thread:
Mini: M 30 x 1.5, standard: M 20 x 1.5
Media:
Compressed air, neutral gases
Scope of delivery:
Pressure limiting valve including pressure gauge
Warning:
Although it is similar in function, this valve does not replace the safety valve and cannot be used as a pressure regulator!
Information:
When configuring the pressure limiter, please note that only the reaction pressure of the pressure limiting valve can be adjusted. Depending on the flow performance, the actual pressure at the pressure input side can be higher by the value specified for overpressure.
Manually adjustable relief valve to protect pneumatic devices from damage caused by overpressure.
Version:
spring-loaded diaphragm valve with adjustable opening pressure
Materials:
Body: die-cast zinc Z410, diaphragms and seals: NBR
Temperature range:
-10 do +60 °C
Pressure gauge connection:
Mini: G 1/8" Standard G 1/4"
Switch panel thread:
Mini: M 30 x 1.5, standard: M 20 x 1.5
Media:
Compressed air, neutral gases
Scope of delivery:
Pressure limiting valve including pressure gauge
Warning:
Although it is similar in function, this valve does not replace the safety valve and cannot be used as a pressure regulator!
Information:
When configuring the pressure limiter, please note that only the reaction pressure of the pressure limiting valve can be adjusted. Depending on the flow performance, the actual pressure at the pressure input side can be higher by the value specified for overpressure.
Lastnosti
| Izvedba | Ventil za omejevanje tlaka s 50 mm manometrom |
| Serija | Standard 3 |
| Navoj | G 1/2" |
| Delovni tlak | 0,1 - 3 |
| Nadtlak pri najv. pretoku | pribl. 1 |
| Pretok | 2000 |
| Manometer prikaz | 0 - 6 |
| Pritrdilni nosilec | BW 30 |
Dodatne informacije o DVU33-3
| Teža | 1,1 kg / Kos |
| GTIN | 4050571277314 |
| Tariff No. | 84814090 |
| Skladno z RoHS | Da |
Dokumenti
- 3D CAD file (volume model) (Samo za prijavljene stranke) (STP)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Naši izdelki in blago so na splošno namenjeni samo za industrijsko in komercialno uporabo.
Možnosti plačila: