Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
Opis artikla
Application:
These filters are used for separating very fine oil and water aerosols and solid impurities with particles up to 0.01 µm. Multi-layer, 3-dimensional non-woven fabric with nano-fibre technology. Depth filters have their applications in instrument and control air in the chemical, petrochemical and pharmaceutical industries as well as in the plastics, food, beverage and process industries, and in general mechanical engineering. We recommend connecting an upstream pre-filter to increase the service life.
Materials:
Body: aluminium with blue polyester resin coating, filter medium: binder-free borosilicate glass with aluminium end caps, O-rings: NBR (free of silicone and release agents), support sleeve: stainless steel
Temperature range:
maks. +80 °C
Input pressure:
1 do 16 bar
Condensate drain:
Hose screw connection for inner hose Ø 8 (steam trap is mounted in a condensate borehole G 1/2")
Scope of delivery:
Filter housing, filter element, differential pressure gauge and automatic drainer
Residual oil content (with inlet concentration of 3 mg/m³):
< 0.01 mg/m³
Separation efficiency (relating to particle 0.01µm):
99,99999 %
These filters are used for separating very fine oil and water aerosols and solid impurities with particles up to 0.01 µm. Multi-layer, 3-dimensional non-woven fabric with nano-fibre technology. Depth filters have their applications in instrument and control air in the chemical, petrochemical and pharmaceutical industries as well as in the plastics, food, beverage and process industries, and in general mechanical engineering. We recommend connecting an upstream pre-filter to increase the service life.
Materials:
Body: aluminium with blue polyester resin coating, filter medium: binder-free borosilicate glass with aluminium end caps, O-rings: NBR (free of silicone and release agents), support sleeve: stainless steel
Temperature range:
maks. +80 °C
Input pressure:
1 do 16 bar
Condensate drain:
Hose screw connection for inner hose Ø 8 (steam trap is mounted in a condensate borehole G 1/2")
Scope of delivery:
Filter housing, filter element, differential pressure gauge and automatic drainer
Residual oil content (with inlet concentration of 3 mg/m³):
< 0.01 mg/m³
Separation efficiency (relating to particle 0.01µm):
99,99999 %
Lastnosti
| Izvedba | Nadomestni element |
Dodatne informacije o SMF03/05
| Teža | 65 g / Kos |
| GTIN | 4050571632298 |
| Številka carinskega blaga | 84213925 |
Dokumenti
- Catalogue page Atlas 9 (Page 631) (PDF)
- Dokumentacijo (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*at +20°C and 7 bar overpressure, **usable type PE/MF/SMF 0002 - 0108, ***usable type PE/MF/SMF 0144 - 0288
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: