Opis artikla
Description:
3-piece manual tap set (fine thread 2-piece), comprising pre-cutter, centre tap and finishing tap for metric threads in accordance with DIN ISO 13. Flanks relief ground, tolerance in accordance with ISO 2 / 6H, gate cut: 2 - 3 turns.
Quality:
HSS-G:
Use for steel, cast steel alloys and non-alloys (<800 N/mm² tensile strength), grey-, malleable-, ductile-, cast and sintered iron, nickel silver, graphite and short cutting aluminium alloys, brass and bronze.
3-piece manual tap set (fine thread 2-piece), comprising pre-cutter, centre tap and finishing tap for metric threads in accordance with DIN ISO 13. Flanks relief ground, tolerance in accordance with ISO 2 / 6H, gate cut: 2 - 3 turns.
Quality:
HSS-G:
Use for steel, cast steel alloys and non-alloys (<800 N/mm² tensile strength), grey-, malleable-, ductile-, cast and sintered iron, nickel silver, graphite and short cutting aluminium alloys, brass and bronze.
Lastnosti
| Izvedba | Komplet ročnih vrtalnikov z navojem |
| Vrsta navoja | Fini navoj (DIN 2181) |
| Navoj | M 4x0,5 |
| Nagib | 0,50 |
| Premer jedrne vrtine | 3,5 |
| Štiriobnik (DIN 10) | 3,4 |
Dodatne informacije o GEWHM4X0,5
| Teža | 15 g / Kos |
| GTIN | 4050571165819 |
| Številka carinskega blaga | 82074010 |
Dokumenti
- Catalogue page Atlas 9 (Page 991) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: