Skupina artiklov

Blažilnik udarcev za manometer za tekocine in pline, do 400 bar

Suitable:

For the assembly of pressure gauges in applications in which strong pulsations or pressure thrusts occur (for example, on compressors, hydraulic presses, steam engines, tension testing machines). The adjustable flow control valve (both directions) facilitates adjustment of the passage cross-section even in the assembled state. By connecting an upstream gauge snubber in series, the life and readability of pressure gauges is increased significantly.

Materials:

Brass / NBR, 1.4571 / FKM or steel / NBR

Temperature range:

-10 do +120 °C
*male thread with centring pin for profiled seal

Dokumenti:

Več informacij Manj podatkov
Blažilnik udarcev za manometer za tekocine in pline, do 400 bar:
5 od 5 izdelkov
Pressure gauge snubber G 1/4", Medenina(MANOS 14 MS)
MANOS 14 MS
Pressure gauge snubber G 1/4", Medenina
34,56 € z DDV
Takoj dobavljivo
Pressure gauge snubber G 1/2", Medenina(MANOS 12 MS)
MANOS 12 MS
Pressure gauge snubber G 1/2", Medenina
26,60 € z DDV
Takoj dobavljivo
Pressure gauge snubber G 1/4", 1.4571(MANOS 14 ES)
MANOS 14 ES
Pressure gauge snubber G 1/4", 1.4571
120,57 € z DDV
Takoj dobavljivo
Pressure gauge snubber G 1/2", 1.4571(MANOS 12 ES)
MANOS 12 ES
Pressure gauge snubber G 1/2", 1.4571
43,90 € z DDV
Takoj dobavljivo
Pressure gauge snubber G 1/2", Jeklo(MANOS 12 ST)
MANOS 12 ST
Pressure gauge snubber G 1/2", Jeklo
27,17 € z DDV
Takoj dobavljivo
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila:

Po povzetju

Račun