Če naročite prek spleta od ponedeljka do četrtka od 16:30 - 21:00 ali v petek od 16:30 - 18:00, pošljemo vaše naročilo po želji še isti dan z GLS (stroški: 5%, min. 10,00 €).
Skupina artiklov
Kotni vtikaci s cevnim navojnim prikljuckom in pregradnim vijacnim prikljuckom, serija HF (will be discontinued)
Plug diameter:
18,5 mm
Flow air (water)*:
1200 - 4100 l/min (15 - 57 l/min)
Function:
Coupled by plugging the plug into the sleeve until you hear a “click”. Pressing the ergonomic plastic release button (protected against accidental unlocking) releases the plug once again. It is possible to combine coupling plugs and coupling sockets with and without a shut-off valve, and made of different materials as desired. The shut-off valve prevents the medium from spilling out when uncoupled.
Polypropylene type:
Materials:
Body, valves and release button: polypropylene (raw material in accordance with FDA), valve springs: Stainless steel AISI 316, seals: EPDM, external spring below push-button: AISI 302, bulkhead nut: Polypropylene, bulkhead seal: EPDM
Temperature range:
0°C to max. +70°C
Operating pressure:
-0.8 to 4,2 bar (>+27°C observe pressure reductions: +40°C: max. 3,4 bar,+ +50°C: max. 2,7 bar,+ 60°C: max. 2,2 bar,+ +70°C: max 1.7 bar)
Media:
Compressed air, water, many acids and alkaline solutions, alcohol, glycol, MEK, oxygen**, ozone, carbon dioxide, many chemicals
Sterilisation possible with:
Formalin, isopropyl alcohol, ethyl alcohol, ethylene oxide, gamma radiation
Operating range:
Suited for use with many chemicals. Not resistant to mineral oils.
Type polysulphone:
Materials:
Body, valves and release button: Polysulphone (raw material in accordance with FDA), valve springs: Stainless steel AISI 316, seals: EPDM, external spring below push-button: AISI 302, bulkhead nut: Polypropylene, bulkhead seal: EPDM
Temperature range:
-40°C to max. +138°C
Operating pressure:
-0.8 to 8,6 bar (>+90°C observe pressure reductions: +100°C: max. 8,2 bar,+ +110°C: max. 7,8 bar,+ +120°C: max. 7,4 bar,+ +130°C: max. 7,1 bar,+ +138°C: max 6.8 bar)
Media:
Compressed air, water, many acids and alkaline solutions, alcohol, glycol, oxygen**, ozone, many chemicals
Sterilisation possible with:
Formalin, isopropyl alcohol, ethyl alcohol, ethylene oxide, gamma radiation, heating to max. +121°C (uncoupled), autoclaves at max. +121°C (uncoupled)
Operating range:
Compatible with**:
CPC Colder HFC12, CPC Colder HFC35, LinkTech series 60PP, LinkTech series 60PS
For general applications, applications at high temperatures. Not resistant to mineral oils. Not suited for external use as it is not UV-stabilised.
Bulkhead borehole:
Ø 30.8 mm, max. bulkhead thickness: 7.5 mm
*When pressure drops by 1 bar (depending on configuration of coupling combination: with/without valve, connection dimension, ... is the flow within the indicated range),
**Be sure to clean before using with oxygen
***Names and designations are.partly. registered trademarks of the respective manufacturer.
**Be sure to clean before using with oxygen
***Names and designations are.partly. registered trademarks of the respective manufacturer.
Dokumenti:
Več informacij
Filtriraj artikle
Kotni vtikaci s cevnim navojnim prikljuckom in pregradnim vijacnim prikljuckom, serija HF (will be discontinued):
3 od 3 izdelkov 
22,97 €
z DDV
27,64 €
z DDV
KSSSW 13 HF PSU BA
Bulkhead elbow coupling plug (HF) with hose screw connection, Polisulfon
33,56 €
z DDV
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: