588,46 €
vč. DPH
Množství ks
vlastnosti
| Dimensions W x L x H | 42.2 mm x 125.8 mm x 76.5 mm |
| Pitch dimension [mm] | 18,9 |
| Diagnosis via LED |
Force mode, Network error, Network status Port 1, Network status Port 2, Voltage supply electronics/sensors, Voltage supply load, System error, Service required |
| Diagnosis via bus |
Under-voltage, Wire break, Short circuit, Parametering error, PROFIsafe addresses different, upper limit value not held, over-temperature, lower limit value not held |
| Module parameter |
Bundling channel alarms, Diagnosis under-voltage, Channel alarms under-voltage, Process value display analogue modules |
| Voltage supply, connection type | Multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity |
95 %, Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 60 °C with vertical installation |
| Max. address volume outputs [Byte] | 64 |
| Fastening type | With Slot rail |
| Material information |
LABS containing materials included, RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 75 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Max. address volume inputs [Byte] | 64 |
| Power blackout bridging [ms] | 20 |
| Configuration support | GSDML file |
| Max. number of modules | 10 |
| System parameter |
Force mode, Diagnosis memory, Failsafe reaction, System start |
| Max. power supply [A] | 8 |
| Voltage supply, function | Electronics and sensors |
| Information about outputs |
62 Byte mit E/A-Diagnose-Interface, 64 Byte ohne Diagnose, 64 Byte mit Statusbits |
| Information out inputs |
62 Byte mit E/A-Diagnose-Interface, 64 Byte ohne Diagnose, 62 Byte mit Statusbits |
| Fieldbus interface, galvanically separated | yes |
| Fieldbus interface, transfer rate | 100 Mbit/s |
| Fieldbus interface | Ethernet |
| Fieldbus interface, connection type | 2x socket |
| Fieldbus interface, connection technology | RJ45 |
| Fieldbus interface, number of pins / wires | 8 |
| Fieldbus interface, report |
PROFINET IRT, PROFINET RT |
| Feldbus-Schnittstelle, Max. Adressvolumen Eingänge [Byte] | 64 |
| Feldbus-Schnittstelle, Max. Adressvolumen Ausgänge [Byte] | 64 |
Další informace k OT-FESTO072236
| hmotnost | 185 g / ks |
| GTIN | 4052568291174 |
| Celní číslo zboží | 85176200 |
| výrobce | Festo |
Dokumenty
Všechny údaje se rozumějí jako nezávazné směrné hodnoty! Za výběr údajů nepotvrzených písemně nepřebíráme žádnou záruku. Údaje o tlaku se vztahují, pokud není uvedeno jinak, ke kapalinám skupiny II při +20°C.
Možnosti zaplacení: