QSML-M5-3-100 (130770) push-in L-fitting

OT-FESTO020109

Principskitse: QSML-M5-3-100 (130770)   &   QSML-M5-2 (133031)   &   QSML-M5-3 (153331)
2,65€ inkl. moms
styk
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
size Mini
Nominal width [mm] 1,5
Seal type on stud gasket
installation position arbitrary
Packing size 100
Construction set up Push-pull principle
Operating pressure complete temperature range [bar] -0.95 to 6
Temperature depending operating pressure [bar] -0.95 to 14
Maritime classification see Certificate
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Information about operating and control medium Oiled operation possible
Corrosion resistant class KBK 1 - low corrosion stress
ambient temperature [°C] -10 to 80
Product weight [g] 2,8
Pneumatic connection 1 Male thread M5
Pneumatic connection 2 For hose exterior diameter 3 mm
Sleeve colour blue
Material information RoHs compliant
Housing material PBT
Sleeve material POM
Tube seal, hose seal material NBR
Hose clamping segment material High-alloyed stainless steels
Nominal tightening torque [Nm] 1,33
Tolerance to nominal tightening torque ± 20 %
OT-FESTO020109
{{ $t('shop.all.gewicht') }} 2,8 g / styk
{{ $t('shop.all.gtin') }} 4052568024918
{{ $t('shop.display.artikel.verpackungseinheit') }} 100 styk
{{ $t('shop.display.artikel.zollwarennummer') }} 74122000
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Tilbehør

Betalingsmuligheder:
{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Der opstod en fejl!

Der opstod en fejl. Indlæs denne side igen og prøv én gang til.

  • {{ $t(error) }}