shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel
0°C to +66°C
0,15 - 4,5 m/s
Fixed limit stop:
Exceeding W4 (max. energy consumed per hour expressed in Nm/h) is possible in the case of temporary switch-off, or when the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating).
*at higher axial deviations use side load adapters (Type BV)***the side load adapter can only be fitted to shock absorbers without impact heads, ****types MC 10 SC2, MB 12 SC2, MB 14 SC2, MB 20 SC2, MB 25 SC2 must be countered with a nut to the shock absorber