shock absorber body and accessory: Steel bronzing, piston rod: hardened, stainless steel, roller type diaphragm: ethylene-propylene
0°C to +66°C
0,06 to 6 m/s
Fixed limit stop:
Exceeding W4: (max. energy absorbed per hour expressed in Nm/h) is possible when switched off temporarily or the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating)
*at higher axial deviations use side load adapters (Type BV)***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.