Złóż zamówienie w weekend, do godz. 15:00 w niedzielę (lub do godziny 15:00 w poniedziałek, gdy poniedziałek jest dniem ustawowo wolnym od pracy), a przesyłka zostanie dostarczona za pośrednictwem kuriera GLS w następnym dniu roboczym do godz. 12:00 (opłata: 5%, min. 30,00 €).
CPX-E-4AO-U-I (4080494) analogue output modu
Numer artykułu:
OT-FESTO072233
420,32 €
z VAT
Ilość Szt.
Właściwości
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Pitch dimension [mm] | 18,9 |
| Quantity outputs: | 4 |
| Diagnosis via LED |
Error per channel, Error per module |
| Diagnosis via bus |
General errors, Short circuit/overload actuator supply, Short circuit/overload analogue output, Parametering error, Exceeding nominal range, Nominal range not reached, Under-voltage load supply |
| Module parameter |
Deactivate actuator supply, Data format analogue outputs, Diagnosis short circuit actuator supply, Diagnosis parametering error, Diagnosis under-voltage load supply, Behaviour after short circuit/overload actuator supply, Behaviour after short circuit/overload analogue output |
| Channel parameter |
Forces channel x, Approval diagnosis wire break/idle, Approval diagnosis parametering error, Approval diagnosis overload/short circuit, Signal range per channel |
| Fuse (short circuit) | Internal electronic fuse Per module |
| Intrinsic power input operating voltage load | Type 15 mA |
| Max. cumulative current outputs per module [A] | 2 |
| Nominal operating voltage DC outputs [V] | 24 |
| Potential separation channel - internal bus | yes |
| Potential separation channel - channel | no |
| Permitted voltage oscillations outputs | ± 25 % |
| Voltage supply, connection type | 2x multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity |
95 %, Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 60 °C with vertical installation |
| Max. address volume outputs [Byte] | 8 |
| Electrical connection: outlet, function | Analogue output |
| Electrical connection: outlet, connection type | 4x multi tube holder |
| Electrical connection: outlet, connection technology | Spring tension clamp |
| Electrical connection: outlet, number of pins / wires | 4 |
| Electrical connection: outlet, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: outlet, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Fastening type | With Slot rail |
| Material information |
LABS containing materials included, RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 60 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Measured parameter |
Voltage, Current |
| Repeatability | ±0.05 % at 25 °C |
| Use error limits related to ambient temperature range | ±0,3 % |
| Base error limit at 25 °C | ±0,1 % |
| Power blackout bridging [ms] | 10 |
| Signal range |
-10 - 10 V, -20 - 20 mA, -5 - 5 V, 0 - 10 V, 0 - 20 mA, 4 - 20 mA |
| Data format |
15 bit + sign, linear scale |
| Max. line length |
30 m, Shielded |
| Electrical connection: outlet 2, function | Functional ground |
| Electrical connection: outlet 2, connection type | Multi tube holder |
| Electrical connection: outlet 2, connection technology | Spring tension clamp |
| Electrical connection: outlet 2, number of pins / wires | 4 |
| Electrical connection: outlet 2, wiring diagram | 00995842 |
| Electrical connection: outlet 2, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: outlet 2, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
Więcej informacji OT-FESTO072233
| Ciężar | 110 g / Szt. |
| GTIN | 4052568291143 |
| Numer towaru podlegającego ocleniu | 85389099 |
| Producent | Festo |
Dokumenty
- Grupa dane techniczne: CPX-E (english) (PDF)
- Dokumentacja (polski) (PDF)
- Karta informacyjna (Podgląd wydruku)
- Karta informacyjna (angielski) (Podgląd wydruku)
Podawane informacje są niezobowiązującymi danymi orientacyjnymi! Nie ponosimy odpowiedzialności za dane wybrane bez pisemnego potwierdzenia. Dane ciśnienia dotyczą, o ile nie podano inaczej, płynów z grupy II w temperaturze +20°C.
Opcje płatności: