EMMS-ST-87-S-SB-G2 (1370484) stepper motor

OT-FESTO034695

Wzorowy interpretacja: EMMS-ST-87-S-SB-G2
686,00€ z VAT
Szt.
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
ambient temperature [°C] -10 to 50
Bearing temperature [°C] -20 to 70
Relative humidity 0 - 85 %
Complies to standard IEC 60034
Insulation protection class B
Heat class to EN 60034-1 B
Measurement class according to DIN 60034-1 S1
Protection category IP54
Electrical connection technology Plug
Material information RoHs compliant
Corrosion resistant class KBK 1 - low corrosion stress
Permission RCM mark
c UL us - Recognized (OL)
CE certificate (see declaration of conformity) to EU EMC directive
Nominal operating voltage DC [V] 48
Holding torque motor [Nm] 2,50
Max. speed [1/min] 2.130
Step angle at full step [deg] 1,8
Step angle tolerance ±5 %
Nominal current motor [A] 9,5
Voltage constant phase [mVmin] 19,0
Winding resistance phase [Ohm] 0,10
Winding inductivity phase [mH] 0,45
Mass inertia Rotor [kg/cm²] 1,000
Total output moment of gyration [kg/cm²] 1,070
Product weight [g] 2.350
Permitted axial shaft loading [N] 65
Permitted radial shaft loading [N] 200
Holding torque brake [Nm] 2,0
Operating voltage DC brakes [V] 24
Power consumption brake [W] 11
Mass inertia Brake [kg/cm²] 0,070
OT-FESTO034695
{{ $t('shop.all.gewicht') }} 2.350 g / Szt.
{{ $t('shop.all.gtin') }} 4052568231460
{{ $t('shop.display.artikel.zollwarennummer') }} 85015100
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Akcesoria

{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Wystąpił błąd!

Wystąpił błąd; wczytaj stronę jeszcze raz i spróbuj ponownie.

  • {{ $t(error) }}